Home

Hertz, DBA 201

Hertz

€289,00 



DBA 201 (8) mm (in.) 

440 W   0.4 Ohm  

Active subwoofer box with double passive radiators


High performance in a compact stylish design

Watch the product video

The DBA 201 active subwoofer box features a double passive radiator enclosure made with solid MDF and optimized with FEM simulation to ensure superior performance, maximizing the subwoofer output. The massive magnet of the 8-in. driver provides optimal control during the highest cone excursion.

Extra full set of controls to fine-tune the in-car performance

The built-in 24 dB/Oct. low-pass crossover filter with a variable cutting corner frequency (50÷150 Hz) allows you to perfectly match the DBA 201 to your speaker system. Adjustable bass boost (0÷6 dB @ 45Hz) can add bass output as you prefer, allowing correction for OEM sound equalization. With the phase inverter (0-180°), you can optimize phase alignment between the DBA 201 and your speaker system, regardless of the subwoofer’s position in the car. The subsonic filter (15 Hz @ 24 dB/Oct) protects the cone from over-excursion and amplifiers from overheating. The input sensitivity control is the perfect tool to maximize the overall system output level while preventing clipping.

Auto turn-on and standby mode

The built-in audio sense circuit allows the DBA 201 to turn on and timeout to standby mode automatically. You can switch off the audio sense function when a remote turn-on wire is available.

Size mm (in.) 200 (8)
Power Handling - Continuous W 220
Power Handling - Peak W 440
Impedance Ohm 0.4
Design Active subwoofer box with double passive radiators
Voice Coil Ø 38.6 (1.52) mm (in.)
Frequency Response Hz 32 ÷ 400
Magnet size D x d x h mm (in.) 115 x 47 x 25 (4.5 x 1.8 x 0.98)
Weight of one component kg (lb.) 6.7 (10.54)
Magnet High Density Flux Ferrite
Cone Pressed paper
Voice Coil Type Copper
Technical Specs
Operating voltage VDC (Fuse) 6.5 ÷ 18 (15A)
Start - Stop voltage VDC 6
Idling current A (Power OFF) 260 m (1 m)
Consumption @ 14,4 VDC Max musical power A 8.5
Remote IN Turn on VDC (Current) 4 (1 mA)
PRE input signal Turn ON VRMS 10 mV
SPK input DC Turn ON VDC 2
Power Supply
Distortion - THD @ 100 Hz % 0.15
Bandwidth Hz 15 - 150
S/N ratio dBA 100
Output power (RMS) @ 14,4 VDC, 1% THD W 220
Amplifier Stage
PRE input signal VRMS (impedance) 0.2 ÷ 5 (10kΩ)
SPK input signal VRMS (impedance) 1.2 ÷ 30 (6Ω)
LO-PASS Filter @ 24 dB Oct adjustable Hz 50 ÷ 150
Subsonic Filter @ 24 dB Oct Fixed Hz 15
Phase switch 0 / 180°
Bass Boost @45 Hz dB 0 ÷ 6
Sub remote volume control dB 0 ÷ -15 (HRC 01 included)
Signals Inputs / Filter
Physical Specs

DBA 201

mm in
A 291 11.46
B 315.5 12.42
C 264 10.39