Home

Alpine, PDP-E802DSP

Alpine, PDP-E802DSP
Alpine, PDP-E802DSP Alpine, PDP-E802DSP Alpine, PDP-E802DSP Alpine, PDP-E802DSP Alpine, PDP-E802DSP Alpine, PDP-E802DSP Alpine, PDP-E802DSP Alpine, PDP-E802DSP

Alpine

€699,00 



8-Channel Digital DSP Amplifier

The PDP-E802DSP is the 2nd generation of Alpine's 8-Channel Digital DSP Amplifier . This amazing all-in-one solution allows the sound system to be upgraded to virtually any vehicle as it is extremely versatile and has many connectivity options. It has  6 fish inputs (for both linear and speaker output ) and up to  8 fully configurable outputs  for a very wide and flexible sound system. Tune your sound system with a professional 240-band parametric equalizer, 8-channel Digital Time Delay and 8-channel Digital Crossover.

To configure the system, there is Alpine PC software that connects via WiFi or via USB. Extremely modern and user-friendly software allows full control over all settings and displays these parameters in a user interface with beautiful graphics support. The free Alpine remote control application (available for both Android and iPhone) lets you quickly control the DSP amplifier and has the most necessary features, such as overall volume, subwoofer volume, input selection, presets, and more. The PDP-E802DSP is the best solution for innovating in- vehicle  OEM audio systems , where, for example, it is not so easy / impossible to change the factory radio. The Alpine DSP amplifier easily connects to an existing OEM system, allowing you to create an extremely wide-ranging sound system in your vehicle.

This versatile DSP amplifier now has many enhancements for easier installation and better sound quality. On the software side, it has a new input system with a significantly lower noise level, and an updated pre-output section allows you to connect an additional subwoofer amplifier if needed. There are also now lower signal-to-noise ratios and jumper circuits with color markings and text for easier installation. In addition, many improvements have been made, such as a much more stable Wi-Fi connection, more detailed control of the RUX-KNOB2 subwoofer , as well as a power-dependent power supply system with automatic adjustment. In addition, it has a new automatic output impedance tester that protects the speakers in case of possible incorrect connections.

 

FEATURES

GENERAL

  • 6CH analog input for highly flexible system integration
    RCA (Low Level) (10kΩ): 0.5 to 4V (rms)
    Speaker Line (High Level) (22Ω): 2 to 18V (rms)
  • 1 digital TOSLINK / SPDIF input
  • Up to 8 speaker outputs with high power rating
  • 110dB signal-to-noise ratio (digital input)
  • Channel separation> 75dB
  • USB Device input for DSP setup by PC
  • Wireless connection with separate module (amp setup) for PC only, or wireless audio streaming (smart phone or PC))
  • Class-D amplifier with fully digital audio path
  • ADCs by Burr Brown
  • Remote app for iOS and Android with basic control functions (Master level, Sub level, Preset recall, source selection)
  • Pre-amp output (copy from channel 8, for external subwoofer amp)

AMP

  • Full digital audio path
  • High output power capability
  • Total power 700 Watt RMS into 4Ω
  • 100 watts per channel into 4Ω
  • 120 watts per channel into 2Ω
  • 200 Watt into 2Ω (two parallel channels)
  • Advanced diagnostics for each output channels (short circuit, overheat, clipping)
  • Start-Stop Engine compatible
  • Load Capability: ≥2Ω
  • Paralleled output supported

DSP

  • Analog Devices DSP (ADAU1452)
  • Up to 8 speaker outputs with independent adjustable output level
  • Independent or linkable setups for all output channels
  • Delay on each channel up to 13.53ms, 0.01msec steps
  • 30-band Graphic Equalizer per channel with configurable frequency, Q (from 1 up to 15) and Gain (-30dB / + 10dB)
  • Digital X-Over for each channel (HP, LP, BP) 6/12/18 / 24dB / 30dB, type of filter (Butterworth, Bessel, Chebyshev, Linkwitz-Riley) selectable
  • Phase Inversion (0 °, 180 °)
  • Master Volume (0 to 42dB)
  • Sub control (0 to 15dB)
  • Possibility to save / load up to 6 presets on DSP
  • External Preset toggling (Preset # 6)
  • Settings can be secured by certificates
  • Free adjustable analog routing (example: channel mixing for center channel or 3-way input signal)
  • EQ ON / OFF possible (for each channel)
  • Delay grouping for easier TCR adjustment (up to 4 groups possible)
  • TCR ON / OFF for each channel possible
  • TCR help calculation for beginners
  • Overview page for all settings
  • Live monitor (for battery voltage and amp temperature)
  • Turn ON by signal, DC bias or wire
  • Alpine RUX-KNOB2 ready (master volume or sub level)
  • Additional gain on digital input (+6, + 9dB). For matching analog / digital source levels.