Home

Alpine S2-A60M

Alpine

€237,00 €250,00



S-Series Mono Power Amplifier - RMS Power Ratings 1 x 600W @ 2 Ohms

S2-A60M

The next generation of Alpine S-Series amplifiers are designed to take your car audio experience to the next level without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on an affordable budget.

The next generation S-Series S2-A60M mono subwoofer amplifier makes it a lot easier to get great bass in your vehicle, delivering up to 600 Watts RMS power @ 2 Ohms. A variable bass boost allows you to dial in some extra punch and impact for more low-frequency enjoyment. You can even add an optional wired remote to control the level of bass from your front seat.

A built-in low-pass filter puts you in command of the frequency spectrum that reaches your sub. The amp includes pre-amp- and speaker-level inputs, so you can install it in almost any vehicle, even one with a factory radio. When using the speaker-level inputs, the amp can sense the incoming signal and turn itself on, eliminating the need to run a separate turn-on wire to the receiver or fuse box. 

S-Series amplifiers are available in two mono, a 4-channel and a 5-channel configuration.

S-Series logo

The New 2023 S-Series Amplifiers

The New 2023 S-Series Amplifiers

Entry-level sound just got elevated with the S2-A60M Mono Amplifier. Its sleek design houses an Alpine Class-D amplifier circuit with 600 Watts of powerful bass performance.

Unparalleled Power

Flexible Application

Unparalleled Power

Alpine's S-Series S2-A60M 600W Mono Amplifier is the perfect solution for unparalleled power and performance on a budget. With a power output of 600W at a 1 Ohm or 2 Ohm drive, this mono amp is capable of driving even the most demanding subwoofers, delivering clean and distortion-free bass for a wide range of applications. Plus, its compact design makes it easy to install in any vehicle.

Flexible Application

New to the Next-Generation S-Series amplifiers is a new selectable remote turn-on circuit, a three-position switch that ensures the amplifier turns on and off at the proper times. This design is crucial with newer, in-vehicle technology and allows for proper integration with any factory or aftermarket system.

Easy Control Access

Optimal Power Matching

Easy Control Access

The amplifier was intentionally designed with sound controls located on the side panels, instead of the top panel, making it easier to access gain and crossover controls when installed under vehicle seats or in shallow-depth locations. Removable end caps were added to cover the side controls and connections, providing a clean, sleek finish to the amplifier.

Optimal Power Matching

With the capacity to deliver 600 Watts of power at 1 Ohm, the S2-A60M is fully equipped to provide ample power to either a single Alpine S-Series 10” or 12” subwoofer, or two S-Series 8” subwoofers, ensuring exceptional sound quality and optimal performance.

Made for S-Series Speakers & Subs

Made for S-Series Speakers & Subs

The S-Series amplifiers are designed to perfectly match the Alpine S-Series speaker and subwoofer line for perfect system building. S-Series components are designed to for customers that want to build a great sounding system without breaking the bank, for a fun and great sounding experience including Hi-Res Audio capabilities.

Next-Gen Alpine S-Series Amplifiers: Power and Performance on a Budget

Next-Gen Alpine S-Series Amplifiers: Power and Performance on a Budget

 

Watch as Alpine Brooks gives you an overview of the next generation of Alpine S-Series Amplifiers, which are designed to take your car audio experience to the next level without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on a budget. If you're looking to upgrade your car's factory audio system, the S-Series Amplifiers from Alpine could be for you.

00:00 - Intro

00:26 - Unparalleled Power

00:56 - Models & Overview

01:12 - Key Features of the 4 & 5 Channel Amps

02:41 - Key Features of Mono Amps

03:55 - Wrap Up

FEATURES

Install

  • Terminal Layout: Two-sided
  • Included terminal covers
  • Screw terminals (for speaker and power cables)

General

  • Class-D Amplification (Digital)
  • Channel Design: Mono Channel
  • Side panel controls
  • Thermal Management Control
  • Top Mounted LED Power/Status Indicator
  • Speaker Level Input
  • 3 turn-on modes (DC HI, Remote HI, Remote LO)
  • Input Channel Selector Switch for Subwoofer
  • Crossover: Variable Low-pass Filter (LPF)
  • Adjustable Gain Control
  • Bass EQ
  • Remote Bass Control (RUX-KNOB2) Ready

SPECIFICATIONS

RMS Power Ratings

  • Per Channel into 1 Ohms, 14.4V (≤1%THD+N): 1 x 600W
  • Per Channel into 2 Ohms, 14.4V (≤1%THD+N): 1 x 600W
  • Per Channel into 4 Ohms, 14.4V (≤1%THD+N): 1 x 330W

Sound Tuning

  • Crossover: Variable LPF: 50-400Hz (-24dB/oct)
  • Bass EQ (+12dB)

General

  • Power Requirements: 14.4 V.DC (9 - 16 V allowable)
  • Input Sensitivity (RCA Input): Hi: 0.5V - 10V / Low: 0.2V - 4.0V
  • High Level Input with automatic power on
  • Frequency Response (+0, -3dB: 1W into 4 ohms): 10Hz – 400Hz
  • THD+N (@ 10W into 4 Ohms): <0.03%
  • Damping Factor: >1000
  • Weight: 2.2kg

Dimensions

  • Heat Sink (WxHxD) mm: 220 x 57 x 210
Manual Download

OM_S2-A120M_S2-A60M_EN.pdf