Home

Audison SR 5.600

Audison

€429,00 
Available for pre-order



SR 5.600 Amplifier

1010 W total power

4 x 115 W + 1 x 550 W @ 2ohm

D-class


Audison SR 5.600 series 5-channel amplifier with crossover and great power packed into ultra-compact dimensions ( 75 W x 4 + 330 W x 1  4Ω)SR line, perfected by taking full advantage of the latest amplification devices. After numerous listening tests with professionals and enthusiasts, the Audison research and development team decided to adopt a new class D technology called ADT (Audison D-Class Technology) for this line of amplifiers, which has made it possible to considerably reduce their size, totally preserving the audio performance that characterises every Audison design.As far as the electronic design is concerned, every aesthetic and functional detail of the Audison SR 5.600 has been taken care of, resulting in a compact amplifier made of extruded aluminium with rounded corners, which facilitates the installation of the product in narrow spaces. Thanks to the generous heat sinks on the two short sides of the amplifiers, there is no need for internal cooling fans, which often cause noise and dust accumulation.In keeping with tradition, the SR amplifiers confirm their vocation for versatility by including on all models a complete filter section, suitable for any kind of audio system configuration. The controls, protected by a satin-finished aluminium panel, are located on the top panel of the amplifier, so that they can be easily reached from above, even after the product has been installed. When the system includes an Audison bit processor, the filter section can be totally excluded.Optional remote control VCR-S1 offers the possibility to adjust the subwoofer level (-20 / + 6 dB) to your musical preference.Audison USSThanks to the integration of Audison USS (Universal Speakers Simulator) technology in the high level inputs, the SR amplifiers can also be conveniently connected to OEM sources equipped with the 'speaker load detection' function, which monitors the presence of a low impedance load enabling the audio outputs.Audison SR 5.600 allows multiple connectivityAll models have balanced high-level inputs for connecting to the OEM headunit speaker output and a low-level RCA for after-market speakers. When using the high-level input, the ART (Automatic Remote On/Off) function can be enabled to control the amplifiers' power-up with the headunit's power button. In addition, there is a remote IN / OUT socket to allow control of multiple amplifiers in cascade that turn on when needed.Through the PRE-OUT signal using the Speaker-IN socket it is possible to interface the amplifier with OEM sources that only have amplified outputs, allowing for system expansion.

FEATURES

  • Elegant and functional design with rounded corners to minimize space, facilitating installation.
  • Built-in USS (Universal Speakers Simulator).
  • Full built-in crossover section.
  • Optional VCR-S1 remote control offers the possibility to adjust the subwoofer level (-20 / + 6 dB) to your musical preference.
  • Balanced high-level inputs for connecting to the OEM head unit speaker output
  • Low-level RCA for after-market speakers.
  • ART (Automatic Remote On/Off) function.
  • Remote IN / OUT socket to allow control of multiple amplifiers.
  • PRE-OUT allows for system expansion.
  • TECHNOLOGIES

    VCR-S2
    Audison D-Class technology

    ADT uses a switching frequency twice as fast as many other modern Class D amplifiers using very high-tolerance component parts to keep the timing correct even during temperature extremes. The higher switching frequency of Audison Class D moves noise much farther away from the audible band. Audison Class D amplifiers also use a steeper 4th-order analog lowpass filter, rather than the simpler 2nd-order lowpass filters usually used in competing designs. The steeper filter will keep noise much lower in amplitude – which is good for controlling EMI and preventing infrasonic noise from getting to the tweeters. It also keeps phase shift outside the audible range. The cost is higher – twice as many components are needed for a 4th-order filter compared to the usual 2nd-order filter, and each output channel needs its own filter – but Audison determined through exhaustive listening testing that this design was the best-sounding approach.

    VCR-S2

    The “All Channels Driven” design philosophy guarantees that the Audison amplifier delivers the rated power on all channels simultaneously. To reach that target, Audison designed the amplifier power supply to handle the cumulative power demand.

    VCR-S2

    Universal Speaker Simulator technology on high-level inputs for maximum compatibility with any type of Head-Unit OEM Source.

AMPLIFIER TECH DATA

Channels 5
Class D-Class
Hi Level Input Yes
Low Level Input Yes
Digital Input No
Power supply voltage / fuse 11 ÷ 15 VDC
Operating power supply voltage 6.5 ÷17 VDC / 2 x 25A
Idling current 2.2 A
Idling current when off 0.04 mA
Consumption @ 14.4 VDC, 2Ω, Max Musical Power 44 A
Remote OUT 6.5 ÷ 15 VDC (150 mA)
Remote IN 6.5 ÷ 15 VDC (1 mA)
ART - Automatic Remote Turn on/off from OUTPUT BTL speakers (Selectable) 1.5 ÷ 7 VDC

AMPLIFIER STAGE

Distortion - THD @ 100 Hz, 4Ω, 70% Rated Power 0.02 %
Bandwidth A 10 Hz ÷ 35 kHz; 10Hz ÷ 500Hz
S/N ratio A 105 dBA
Damping factor A 100
Input sensitivity Pre-In 0.2 ÷ 5 VRMS
Input sensitivity Speaker-In 0.8 ÷ 20 VRMS
Total Power RMS 1010 W
Minimum load impedance 5Ch: 2Ω
3Ch: 4Ω + 4Ω + 2Ω
Output Power (RMS) @14.4 VDC, 1% THD 5Ch 75 W x 4 + 330 W x 1 (4Ω)

5Ch 115 W x 4 + 550 W x 1 (2Ω)

3Ch 230 W x 2 (4Ω) + 310 W x 1 (4Ω)

3Ch 230 W x 2 (4Ω) + 550 W x 1 (2Ω)
Adjustable Crossover Yes

CEA SPECIFICATIONS

Output power @ 4Ω, 1% THD+N, 14.4 V Output power @ 4Ω, 1% THD+N, 14.4 V: 75 W x 4 Ch + 300 W x 1 Ch
SN ratio (ref. 1W output) SN ratio (ref. 1W output): 75 W: 84 dBA – 300 W: 75 dBA

INPUTS

Input Type Pre-In / Speaker-In
Filters Outputs -
Filter Pass A Front Ch Filters: Full - Hi-pass: 50 ÷ 500 Hz @ 12 dB/Oct. (x1) - Hi-pass: 50 ÷ 5k Hz @ 12 dB/Oct. (x10)
Filter Pass B Rear Ch Filters: Full Hi-pass: 50 ÷ 5k Hz @ 12 dB/Oct
Filter Pass C Rear Ch Filters: Full Band-pass: 50 ÷ 500 Hz (Hi) @ 12 dB/Oct.
Channel Mono Rear Ch Filters: Full 50 ÷ 5 kHz (Lo) @ 12 dB/Oct.
Inputs/Outputs Sub CH Lo-pass: 50 ÷ 500 Hz @ 24 dB/Oct
Inputs/Outputs Phase -
Inputs/Outputs Bass Boost (0 ÷12) dB
Inputs/Outputs Subsonic 25 Hz @ 24 dB/Oct
Remote Sub Volume (-20 ÷ 6) dB

OTHER