Hertz, Mille Pro MPK165P.3
MPK 165P.3Kit | 230 W Peak Power | Kit 2 way 3 ohm | MP 165P.3 + MP 25.3 + Grilles + Crossover
The MPK 165P.3 car audio speakers system energy in the mid-low range ensures a unique listening experience, creating the ideal set up alongside a powerful subwoofer section. The MP 165P.3 wooferelectroacoustic parameters have been forged to give it the pure and solid sound of an authentic mid-bass, designed for high dynamic systems. The MPK 165P.3 timbre balance is entrusted to the MPCX 2P.3 crossoverfeaturing a copper inductor with a 1 mm diameter wire to filter the MP 165P.3, which, with its nominal 3 Ω requires high impulse currents. The tweeter MP 25.3 12dB/Octave crossover is built with extremely high quality 160V bi-metallized polyester film capacitor and an air coil inductor. The tweeter (MP 25.3) level control (0/+2.5dB) provides the ability to adapt the system response to the listener preferences and considering the components installation position.
MP 25.3
- Tetolon fiber soft dome, for a natural yet detailed reproduction of musical nuances.
- “Center Tuning Duct” geometry, for lower resonance frequency and reduced harmonic distortion.
- High density flux Neodymium magnet, optimized for utmost control during high energy dynamic transients in the mid-high frequency range.
- 25 mm ferrofluid-cooled mobile voice coil.
- Rear chamber filled with selected damping material and sized for lower Fs, to ensure a well damped high pass frequency roll-off, allowing a low cut-off frequency crossover point.
- Faceplate featuring FEM (Finite Element Modeling) optimized geometry, for high linearity in off-axis installations.
- Wide array of installation accessories, for an easy OEM integration.
MP 165P.3
- 3 ohm nominal impedance to exploit all the amplifier’s power.
- 14 mm height pure copper voice coil wound on a polyamide former, for exceptional power handling.
- 95 mm diameter magnet to maximize control over the whole excursion.
- Exponential V-cone® profile pressed-pulp cone with cotton fibers, combining stiffness and lightweight construction for a wide frequency response. Cone profile geometrically optimized for utmost linearity and dispersion in the mid frequency range.
- “Boundary Free” rubber surround, for improved efficiency and wider mid-bass frequency response.
- Low mounting depth, acoustically transparent aluminium alloy basket with elegant diamond cutting and featuring the aluminium Hertz logo.
- Full protection metal mesh grille featuring the aluminium Hertz logo and attractive mineral powder coated inner grille are included for several installation combinations.
MPCX 2P.3
- Two-position (0 / +2.5 dB) switch for tweeter level adjustments, to fine-tune the transducers emission.
- 160 V extremely high quality bi-metallized polyester film capacitors with ultra-low DF, for maximum sound transparency and clean mid/high frequencies.
- 1 mm pure copper wire low series resistance inductors, for low dissipation losses on the woofer section where high transient currents are demanded.
- Small footprint design for easy installation, with top vent grille for efficient heat dissipation.

The exponential profile gets very close to the perfect one, providing exceptional dispersion.

This technology provides the ability to achieve wider emission surface of the cone compared to speakers with same diameter; that way, the cone manages to move a bigger mass of air, so it produces more acoustic pressure.
This special surround is built from highly pure IIR butyl rubber, ensuring extraordinary thermal and mechanical linearity.
| Power Handling - Peak W | 230 |
| Power Handling - ContinuousW | 115 |
| Impedance Ω | 3 |
| Frequency response Hz | 45 ÷ 22,5k |
| Sensitivity dB SPL | 93 |
| Voice coil Ø mm (in.) | 25 (1) |
| Woofer size mm (in.) | 165 (6.5) |
| Tweeter size mm (in.) | 29 (1.14) |
| Woofer magnet | High density flux ferrite |
| Tweeter magnet | Neodymium |
| Woofer cone | Pressed-pulp cone with cotton fibers |
| Tweeter dome | Tetolon |
| Crossover type | 2 Way Passive Crossover |
| Crossover cut off | 4 kHz |
KOMPONENTKÕLARISÜSTEEM, KOMPONENTKÕLAR, KOMPONENT, KÕLAR, KOMPONENTKÕLARID, КОМПОНЕНТНЫЕ КОЛОНКИ, КОМПОНЕНТНЫЕ, КОЛОНКИ